Outside Micrometers - Standard & Digital

Outside micrometers are used in various applications and are most commonly used when measuring outside diameters or thicknesses of parts and features. Haas outside micrometers are offered in digital and standard configurations and come in a wide variety of ranges. 

• Available in inch (U.S. only) and metric
• Ratchet stop thimble
• Carbide measuring tips
• Made in accordance with DIN 863 
• IP rated for dust and liquid resistance
• Battery type: CR2032 / CR2450
• Stainless steel spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Digital features: Absolute / Relative measuring, Metric / Inch conversion, and Zero-Setting

Screw Thread Micrometer - Standard & Digital

Screw Thread Micrometers measure the thread pitch or threads per unit length of screw threads. These micrometers have specially designed, interchangeable anvils to fit into the grooves of threads allowing for accurate and precise measuring of pitch.

• Available in inch (U.S. Only) and metric
• Stainless steel spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Rotating and non-rotating spindle
• Stainless steel anvils included
• Made in accordance with DIN 863
• Battery type: CR2032
• IP rated for dust and liquid resistance
• Ratchet stop thimble

Blade Micrometer - Standard & Digital

Blade Micrometers can be used for measuring groove diameters on shafts, or other narrow recessed features. Haas blade micrometers feature a non-rotating spindle for quick and easy measuring of parts. 

• Available in inch (U.S. only) and metric thimbles
• Standard or digital configurations available
• Made in accordance with DIN863
• Stainless steel spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Ratchet stop thimble
• Graduations available in 0.001 in \ 0.01 mm
• Digital resolution: 0.00005" (0.001mm)
• Non-rotating spindle

Disc Micrometer - Digital Only

Disc Micrometers feature two large disc anvils, great for measuring the thickness of features such as ribs, fins, or cutting edges that may be tough to measure accurately with a standard micrometer. This type of micrometer is also used in applications where measurements of thin materials such as paper, rubber sheets, and gaskets are required.

• Available in inch (U.S. only) and metric
• Ratchet stop thimble.
• Battery type: CR2032
• Made in accordance with DIN863
• Stainless steel spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Digital functions: Absolute / Relative measuring, Metric / Inch conversion, and Zero-Setting
• Graduations available in 0.0001 in \ 0.01 mm
• Digital resolution: 0.00005" (0.001mm)

Gear Tooth Micrometer - Digital Only

Gear Tooth Micrometers are designed specifically for measuring the dimensions of gears. The stainless-steel anvil set features a ball tip, making it easy to measure gear tooth thickness and pitch diameter.

Please note: Gear tooth micrometer anvils are sold separately (09-0292)

• Available in 6 metric thimble options
• Metric thimble
• Ratchet stop thimble
• Digital resolution: 0.00005" (0.001mm)
• Graduation: 0.01 mm
• Made in accordance with DIN 863
• IP rated for dust and liquid resistance
• Battery type: CR2032

Spline Micrometer - Digital Only

Spline Micrometers feature smaller diameter anvil tips making them great for measuring pitch diameter and other dimensions on splined shafts, slots, and keyways to ensure proper meshing.

• Available in 4 size ranges
• Carbide measuring tips
• Battery type: CR2032
• IP rated for dust resistance
• Made in accordance with DIN 863
• Stainless steel spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Ratchet stop thimble
• Digital resolution: 0.00005" (0.001mm)

V-Anvil Micrometer - Digital Only

V-Anvil Micrometer are specialized for measuring cutting tools or parts with an odd number of flutes, where a direct diameter reading is not possible. V-angles for 3-flute and 5-flute available.

• Available in 5 metric thimble options
• 2 Anvil types - flat & pointed
• Digital resolution: 0.00005" (0.001mm)
• Graduation: 0.01 mm
• Stainless steel spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Carbide measuring tips
• Ratchet stop thimble
• Made in accordance with DIN 863
• Battery type: CR2032
• IP rated for dust and liquid resistance

Internal Groove Micrometer - Standard Only

An Internal Groove Micrometer is used for measuring grooves or notches found on the inside diameter of parts. Two flange-shaped anvils make getting into hard-to-reach features easy, providing an accurate measurement.

• Available in inch (U.S. only) & metric
• Friction thimble – Provides constant resistance for consistent pressure during measurements
• Made in accordance with DIN 863
• Non-rotating spindle

Universal Micrometer - Digital Only

Need one micrometer that can do it all and provides a high degree of accuracy and precision? The Haas Universal Micrometer includes 7 interchangeable anvil types that can be used for measuring a variety of features and parts.

• Available in 2 universal ranges
• Ratchet stop thimble
• Stainless Steel Spindle
• Spindle thread is hardened, ground, and lapped for ultimate accuracy
• Made in accordance with DIN 863
• Battery type: CR2032
• 7 pairs of anvils – Spline, disc, blade, 60° knife-edge, 60° point, spherical, and flat.