<x:TEMPLATE xmlns:x='urn:TEMPLATE' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='urn:TEMPLATE Vps_Template_Schema.xsd'>
<x:VERSION>2</x:VERSION>
<x:NAME>Synchronous Pulley </x:NAME>
<x:PICTURE>
<x:NAME>.ODSprocketPics/OD Sprocket.gif</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
<x:INPUT>
<x:NAME>WORK_OFFSETS</x:NAME>
<x:HELP>DBID_VPS_ENTER_WRK_OFFSET</x:HELP>
<x:VARIABLE>
<x:NAME>WORK_OFFSETS</x:NAME>
<x:DEFAULT>54</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/0. workoffsets.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PCODE</x:NAME>
<x:HELP>This variable reads the internal miliseconds timer to use for P-code in canned cycles</x:HELP>
<x:VARIABLE>
<x:NAME>PCODE</x:NAME>
<x:DEFAULT>##3001##/10000</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>QCODE</x:NAME>
<x:HELP>This variable reads the internal miliseconds timer to use for Q-code (+1) in canned cycles</x:HELP>
<x:VARIABLE>
<x:NAME>QCODE</x:NAME>
<x:DEFAULT>::PCODE::+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DIF</x:NAME>
<x:HELP>INCH/METRIC CONVERSION FACTOR</x:HELP>
<x:VARIABLE>
<x:NAME>DIF</x:NAME>
<x:DEFAULT>##20009##*24.4</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>CF</x:NAME>
<x:HELP>INCH/METRIC CONVERSION FACTOR</x:HELP>
<x:VARIABLE>
<x:NAME>CF</x:NAME>
<x:DEFAULT>25.4-::DIF::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>MAX_FEEDRATE</x:NAME>
<x:VARIABLE>
<x:NAME>MAX_FEEDRATE</x:NAME>
<x:DEFAULT>##30059##/::CF::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TL_TOOL</x:NAME>
<x:HELP>Turret Type</x:HELP>
<x:VARIABLE>
<x:NAME>TL_TOOL</x:NAME>
<x:DEFAULT>##20113##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOLFIX</x:NAME>
<x:HELP>MAX turret positions</x:HELP>
<x:VARIABLE>
<x:NAME>TOOLFIX</x:NAME>
<x:DEFAULT>##30065##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TL_TOOL2</x:NAME>
<x:HELP>Conversion to calculate whether max tool limit is 99 for TL Post and Gang TL, or number of stations on the turret</x:HELP>
<x:VARIABLE>
<x:NAME>TL_TOOL2</x:NAME>
<x:DEFAULT>(::TL_TOOL::+(::TL_TOOL::-1))/4</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>MAX_TOOLS</x:NAME>
<x:HELP>Maximum number of tools</x:HELP>
<x:VARIABLE>
<x:NAME>MAX_TOOLS</x:NAME>
<x:DEFAULT>((99*::TL_TOOL2::)+::TOOLFIX::)-(::TL_TOOL2::*::TOOLFIX::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL</x:NAME>
<x:HELP>Active tool on turret</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL</x:NAME>
<x:DEFAULT>##3026##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_NUMBER</x:NAME>
<x:HELP>Current active TOOL NUMBER is default. Re-type and Enter to Save*</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>TOOL_NUMBER</x:NAME>
<x:DEFAULT>::TOOL::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1</x:MIN>
<x:MAX>::MAX_TOOLS::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/1. tool number.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_OFFSET_NUMBER</x:NAME>
<x:HELP>Select 1-99. Proceed with CAUTION when TOOL and OFFSET numbers do not match</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>TOOL_OFFSET_NUMBER</x:NAME>
<x:DEFAULT>::TOOL_NUMBER::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1</x:MIN>
<x:MAX>99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/2. offset number.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_OFFSET_X</x:NAME>
<x:VARIABLE>
<x:NAME>TOOL_OFFSET_X</x:NAME>
<x:DEFAULT>##(53800+::TOOL_OFFSET_NUMBER::)##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>Y_AXIS</x:NAME>
<x:HELP>Is there Y-axis present?</x:HELP>
<x:VARIABLE>
<x:NAME>Y_AXIS</x:NAME>
<x:DEFAULT>##30002.004##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>C_AXIS</x:NAME>
<x:HELP>Is there C-axis present?</x:HELP>
<x:VARIABLE>
<x:NAME>C_AXIS</x:NAME>
<x:DEFAULT>##30007.004##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_OFFSET_Y</x:NAME>
<x:VARIABLE>
<x:NAME>TOOL_OFFSET_Y</x:NAME>
<x:DEFAULT>##(54000+::TOOL_OFFSET_NUMBER::)##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_OFFSET_Z</x:NAME>
<x:VARIABLE>
<x:NAME>TOOL_OFFSET_Z</x:NAME>
<x:DEFAULT>##54200+(::TOOL_OFFSET_NUMBER::)##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOLXZ</x:NAME>
<x:VARIABLE>
<x:NAME>TOOLXZ</x:NAME>
<x:DEFAULT>(::TOOL_OFFSET_X::)*(::TOOL_OFFSET_Z::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_OFFSET_IS_ZERO</x:NAME>
<x:HELP>No TOOL OFFSET present. Please set Tool Offset to continue</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>TOOL_OFFSET_IS_ZERO</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOL_OFFSET_X::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOL_OFFSET_Z::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>AND</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/3. NO TOOL OFFSET PRESENT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_MATERIAL_TYPE</x:NAME>
<x:HELP>Enter the number that corresponds to your material type</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>PART_MATERIAL_TYPE</x:NAME>
<x:DEFAULT>0</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>0</x:ENUM>
<x:ENUM>1</x:ENUM>
<x:ENUM>2</x:ENUM>
<x:ENUM>3</x:ENUM>
<x:ENUM>4</x:ENUM>
<x:ENUM>5</x:ENUM>
<x:ENUM>6</x:ENUM>
<x:ENUM>7</x:ENUM>
<x:ENUM>8</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/4. Part material type.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_0</x:NAME>
<x:HELP>Enter the Depth of cut for non allow steel per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_0</x:NAME>
<x:DEFAULT>.11/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.06/::CF::</x:MIN>
<x:MAX>.15/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_1</x:NAME>
<x:HELP>Enter the Depth of cut for low alloy steel per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_1</x:NAME>
<x:DEFAULT>.08/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.04/::CF::</x:MIN>
<x:MAX>.12/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_2</x:NAME>
<x:HELP>Enter the Depth of cut for stainless per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_2</x:NAME>
<x:DEFAULT>.06/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.03/::CF::</x:MIN>
<x:MAX>.08/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_3</x:NAME>
<x:HELP>Enter the Depth of cut for cast iron per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_3</x:NAME>
<x:DEFAULT>.13/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.06/::CF::</x:MIN>
<x:MAX>.2/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_4</x:NAME>
<x:HELP>Enter the Depth of cut for aluminum per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_4</x:NAME>
<x:DEFAULT>.2/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.1/::CF::</x:MIN>
<x:MAX>.25/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_5</x:NAME>
<x:HELP>Enter the Depth of cut for copper/brass per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_5</x:NAME>
<x:DEFAULT>.1/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.06/::CF::</x:MIN>
<x:MAX>.15/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_6</x:NAME>
<x:HELP>Enter the Depth of cut for plastic per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_6</x:NAME>
<x:DEFAULT>.25/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.2/::CF::</x:MIN>
<x:MAX>.3/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_7</x:NAME>
<x:HELP>Enter the Depth of cut for super alloy per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_7</x:NAME>
<x:DEFAULT>.06/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.03/::CF::</x:MIN>
<x:MAX>.08/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEPTH_OF_CUT_8</x:NAME>
<x:HELP>Enter the Depth of cut for hardened steel per pass</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>DEPTH_OF_CUT_8</x:NAME>
<x:DEFAULT>.06/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.03/::CF::</x:MIN>
<x:MAX>.08/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/5. DEPTH OF CUT.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_0</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_0</x:NAME>
<x:DEFAULT>8000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>6000./::CF::</x:MIN>
<x:MAX>10000./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_1</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_1</x:NAME>
<x:DEFAULT>6000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>4500./::CF::</x:MIN>
<x:MAX>7500./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_2</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_2</x:NAME>
<x:DEFAULT>5000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>3750./::CF::</x:MIN>
<x:MAX>6250./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_3</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_3</x:NAME>
<x:DEFAULT>6000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>4500./::CF::</x:MIN>
<x:MAX>7500./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_4</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_4</x:NAME>
<x:DEFAULT>10000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>7500./::CF::</x:MIN>
<x:MAX>12500./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_5</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_5</x:NAME>
<x:DEFAULT>7000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>5250./::CF::</x:MIN>
<x:MAX>8750./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_6</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_6</x:NAME>
<x:DEFAULT>10000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>7500./::CF::</x:MIN>
<x:MAX>12500./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_7</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_7</x:NAME>
<x:DEFAULT>5000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>3750./::CF::</x:MIN>
<x:MAX>6250./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FEEDRATE_8</x:NAME>
<x:HELP>Enter the FEEDRATE in Inches Per Minute (IPM) or Millimeters per Minute (MMPM)</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>FEEDRATE_8</x:NAME>
<x:DEFAULT>5000./::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>3750./::CF::</x:MIN>
<x:MAX>6250./::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/6. FEEDRATE.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>BELT_PITCH</x:NAME>
<x:HELP>Enter the Letter that corresponds to your Belt Pitch, Belt Type and Profile</x:HELP>
<x:VARIABLE>
<x:NAME>BELT_PITCH</x:NAME>
<x:DEFAULT>A</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>A</x:ENUM>
<x:ENUM>B</x:ENUM>
<x:ENUM>C</x:ENUM>
<x:ENUM>D</x:ENUM>
<x:ENUM>E</x:ENUM>
<x:ENUM>F</x:ENUM>
<x:ENUM>G</x:ENUM>
<x:ENUM>H</x:ENUM>
<x:ENUM>I</x:ENUM>
<x:ENUM>J</x:ENUM>
<x:ENUM>K</x:ENUM>
<x:ENUM>L</x:ENUM>
<x:ENUM>M</x:ENUM>
<x:ENUM>N</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-2</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/7. Pitch.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_2MM_PG</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 2mm PowerGrip&#174; GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_2MM_PG</x:NAME>
<x:DEFAULT>10</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>10</x:MIN>
<x:MAX>150</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_3MM_PG</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 3mm  PowerGrip&#174; GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_3MM_PG</x:NAME>
<x:DEFAULT>9</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>9</x:MIN>
<x:MAX>140</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_3MM_HTD</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 3mm Pitch HTD&#174;  belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_3MM_HTD</x:NAME>
<x:DEFAULT>10</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>10</x:MIN>
<x:MAX>100</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_5MM_PG</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 5mm PowerGrip&#174; GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_5MM_PG</x:NAME>
<x:DEFAULT>12</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>12</x:MIN>
<x:MAX>60</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_5MM_PC</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 5mm PolyChain&#174; GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_5MM_PC</x:NAME>
<x:DEFAULT>12</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>12</x:MIN>
<x:MAX>60</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_5MM_HTD</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 5mm HTD&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_5MM_HTD</x:NAME>
<x:DEFAULT>12</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>12</x:MIN>
<x:MAX>90</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_8MM_PG</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 8mm PowerGrip&#174;  GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_8MM_PG</x:NAME>
<x:DEFAULT>22</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>22</x:MIN>
<x:MAX>119</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_8MM_PC</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 8mm PolyChain&#174; GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_8MM_PC</x:NAME>
<x:DEFAULT>22</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>22</x:MIN>
<x:MAX>58</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_14MM_PC</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 14mm PolyChain&#174; GT&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_14MM_PC</x:NAME>
<x:DEFAULT>28</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>28</x:MIN>
<x:MAX>60</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_14MM_HTD</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on 14mm HTD&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_14MM_HTD</x:NAME>
<x:DEFAULT>28</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>28</x:MIN>
<x:MAX>60</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_MXL</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on MXL&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_MXL</x:NAME>
<x:DEFAULT>10</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>10</x:MIN>
<x:MAX>120</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_XL</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on XL&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_XL</x:NAME>
<x:DEFAULT>10</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>10</x:MIN>
<x:MAX>80</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_L</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on L&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_L</x:NAME>
<x:DEFAULT>10</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>10</x:MIN>
<x:MAX>72</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>NUMBER_OF_TEETH_H</x:NAME>
<x:HELP>Enter the # of Teeth. Ranges based on H&#174; belts</x:HELP>
<x:VARIABLE>
<x:NAME>NUMBER_OF_TEETH_H</x:NAME>
<x:DEFAULT>14</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>14</x:MIN>
<x:MAX>60</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/8. number of teeth.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_2MM_PG</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_2MM_PG</x:NAME>
<x:DEFAULT>(((2.0*::NUMBER_OF_TEETH_2MM_PG::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_3MM_PG</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_3MM_PG</x:NAME>
<x:DEFAULT>(((3.0*::NUMBER_OF_TEETH_3MM_PG::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_3MM_HTD</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_3MM_HTD</x:NAME>
<x:DEFAULT>(((3.0*::NUMBER_OF_TEETH_3MM_HTD::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_5MM_PG</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_5MM_PG</x:NAME>
<x:DEFAULT>(((5.0*::NUMBER_OF_TEETH_5MM_PG::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_5MM_PC</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_5MM_PC</x:NAME>
<x:DEFAULT>(((5.0*::NUMBER_OF_TEETH_5MM_PC::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_5MM_HTD</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_5MM_HTD</x:NAME>
<x:DEFAULT>(((5.0*::NUMBER_OF_TEETH_5MM_HTD::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_8MM_PG</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_8MM_PG</x:NAME>
<x:DEFAULT>(((8.0*::NUMBER_OF_TEETH_8MM_PG::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_8MM_PC</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_8MM_PC</x:NAME>
<x:DEFAULT>(((8.0*::NUMBER_OF_TEETH_8MM_PC::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_14MM_PC</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_14MM_PC</x:NAME>
<x:DEFAULT>(((14.0*::NUMBER_OF_TEETH_14MM_PC::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_14MM_HTD</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_14MM_HTD</x:NAME>
<x:DEFAULT>(((14.0*::NUMBER_OF_TEETH_14MM_HTD::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_MXL</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_MXL</x:NAME>
<x:DEFAULT>(((2.032*::NUMBER_OF_TEETH_MXL::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_XL</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_XL</x:NAME>
<x:DEFAULT>(((5.08*::NUMBER_OF_TEETH_XL::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_L</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_L</x:NAME>
<x:DEFAULT>(((9.525*::NUMBER_OF_TEETH_L::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PITCH_DIAMETER_H</x:NAME>
<x:HELP>Reference Pitch Diameter based on Pitch and # of Teeth selected is displayed</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PITCH_DIAMETER_H</x:NAME>
<x:DEFAULT>(((12.7*::NUMBER_OF_TEETH_H::)/3.1415927)/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/9. Pitch dia.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_2MM_PG</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_2MM_PG</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_2MM_PG::)-(0.508/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_3MM_PG</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_3MM_PG</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_3MM_PG::)-(0.762/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_3MM_HTD</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_3MM_HTD</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_3MM_HTD::)-(0.762/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_5MM_PG</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_5MM_PG</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_5MM_PG::)-(1.143/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_5MM_PC</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_5MM_PC</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_5MM_PC::)-(1.143/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_5MM_HTD</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_5MM_HTD</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_5MM_HTD::)-(1.143/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_8MM_PG</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_8MM_PG</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_8MM_PG::)-(1.3716/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_8MM_PC</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_8MM_PC</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_8MM_PC::)-(1.6/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_14MM_PC</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_14MM_PC</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_14MM_PC::)-(2.794/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_14MM_HTD</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_14MM_HTD</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_14MM_HTD::)-(2.794/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_MXL</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_MXL</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_MXL::)-(0.508/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_XL</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_XL</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_XL::)-(0.508/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_L</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_L</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_L::)-(0.762/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_H</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_H</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_H::)-(1.3716/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/10. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_2MM_PG_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_2MM_PG_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_2MM_PG::)-(0.508/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_3MM_PG_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_3MM_PG_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_3MM_PG::)-(0.762/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_3MM_HTD_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_3MM_HTD_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_3MM_HTD::)-(0.762/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_5MM_PG_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_5MM_PG_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_5MM_PG::)-(1.143/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_5MM_PC_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_5MM_PC_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_5MM_PC::)-(1.143/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_5MM_HTD_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_5MM_HTD_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_5MM_HTD::)-(1.143/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_8MM_PG_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_8MM_PG_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_8MM_PG::)-(1.3716/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_8MM_PC_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_8MM_PC_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_8MM_PC::)-(1.6/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_14MM_PC_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_14MM_PC_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_14MM_PC::)-(2.794/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_14MM_HTD_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_14MM_HTD_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_14MM_HTD::)-(2.794/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_MXL_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_MXL_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_MXL::)-(0.508/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_XL_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_XL_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_XL::)-(0.508/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_L_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_L_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_L::)-(0.762/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>PART_DIAMETER_H_</x:NAME>
<x:HELP>Machined Part Diameter Required is Displayed. Tolerance Displayed for reference</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>PART_DIAMETER_H_</x:NAME>
<x:DEFAULT>(::PITCH_DIAMETER_H::)-(1.3716/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>##20009##</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/21. part diameter.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1211</x:NAME>
<x:HELP>Insert 02-1211 (10 to 25 teeth) for 2M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1211</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>25</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1212</x:NAME>
<x:HELP>Insert 02-1212 (26 to 56 teeth) for 2M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1212</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>26</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>56</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1213</x:NAME>
<x:HELP>Insert 02-1213 (57 to 150 teeth) for 2M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1213</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>57</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0795</x:NAME>
<x:HELP>Insert 02-0795 (9 to 27 teeth) for 3M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0795</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>27</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0799</x:NAME>
<x:HELP>Insert 02-0799 (28 to 56 teeth) for 3M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0799</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>28</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>56</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0803</x:NAME>
<x:HELP>Insert 02-0803 (57 to 140 teeth) for 3M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0803</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>57</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1214</x:NAME>
<x:HELP>Insert 02-1214 (10 to 24 teeth) for 3M Pitch HTD&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1214</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>24</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1215</x:NAME>
<x:HELP>Insert 02-1215 (25 to 50 teeth) for 3M Pitch HTD&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1215</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>25</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>50</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1216</x:NAME>
<x:HELP>Insert 02-1216 (51 to 100 teeth) for 3M Pitch HTD&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1216</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>51</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0807</x:NAME>
<x:HELP>Insert 02-0807 (12 to 15 teeth) for 5M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0807</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>15</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0811</x:NAME>
<x:HELP>Insert 02-0811 (16 to 32 teeth) for 5M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0811</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>16</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>32</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0815</x:NAME>
<x:HELP>Insert 02-0815 (33 to 60 teeth) for 5M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0815</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0807_</x:NAME>
<x:HELP>Insert 02-0807 (12 to 15 teeth) for 5M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0807_</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>15</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0811_</x:NAME>
<x:HELP>Insert 02-0811 (16 to 32 teeth) for 5M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0811_</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>16</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>32</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0815_</x:NAME>
<x:HELP>Insert 02-0815 (33 to 60 teeth) for 5M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0815_</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1217</x:NAME>
<x:HELP>Insert 02-1217 (12 to 20 teeth) for 5M Pitch HTD&#174;  belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1217</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>20</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1218</x:NAME>
<x:HELP>Insert 02-1218 (21 to 46 teeth) for 5M Pitch HTD&#174;  belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1218</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>21</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>46</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1219</x:NAME>
<x:HELP>Insert 02-1219 (47 to 90 teeth) for 5M Pitch HTD&#174;  belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1219</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>47</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0819</x:NAME>
<x:HELP>Insert 02-0819 (22 to 29 teeth) for 8M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0819</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>29</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0823</x:NAME>
<x:HELP>Insert 02-0823 (30 to 50 teeth) for 8M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0823</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>30</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>50</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-0827</x:NAME>
<x:HELP>Insert 02-0827 (51 to 119 teeth) for 8M PowerGrip&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-0827</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>51</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1220</x:NAME>
<x:HELP>Insert 02-1220 (22 to 27 teeth) for 8M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1220</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>27</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1221</x:NAME>
<x:HELP>Insert 02-1221 (28 to 37 teeth) for 8M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1221</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>28</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>37</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1222</x:NAME>
<x:HELP>Insert 02-1222 (38 to 58 teeth) for 8M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1222</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>38</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1223</x:NAME>
<x:HELP>Insert 02-1223 (28 to 33 teeth) for 14M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1223</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1224</x:NAME>
<x:HELP>Insert 02-1224 (34 to 42 teeth) for 14M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1224</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>34</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>42</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1225</x:NAME>
<x:HELP>Insert 02-1225 (43 to 60 teeth) for 14M PolyChain&#174; GT&#174; belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1225</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>43</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1226</x:NAME>
<x:HELP>Insert 02-1226 (28 to 33 teeth) for 14M Pitch HTD&#174;  belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1226</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1227</x:NAME>
<x:HELP>Insert 02-1227 (34 to 42 teeth) for 14M Pitch HTD&#174;  belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1227</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>34</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>42</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1228</x:NAME>
<x:HELP>Insert 02-1228 (43 to 60 teeth) for 14M Pitch HTD&#174;  belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1228</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>43</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1232</x:NAME>
<x:HELP>Insert 02-1232 (10 to 24 teeth) for MXL belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1232</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>24</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1229</x:NAME>
<x:HELP>Insert 02-1229 (25 to 50 teeth) for MXL belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1229</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>25</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>50</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1230</x:NAME>
<x:HELP>Insert 02-1230 (51 to 120 teeth) for MXL belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1230</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>51</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1231</x:NAME>
<x:HELP>Insert 02-1231 (10 to 21 teeth) for XL belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1231</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>21</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1233</x:NAME>
<x:HELP>Insert 02-1233 (22 to 40 teeth) for XL belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1233</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>22</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>40</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1234</x:NAME>
<x:HELP>Insert 02-1234 (41 to 80 teeth) for XL belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1234</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>41</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1235</x:NAME>
<x:HELP>Insert 02-1235 (10 to 15 teeth) for L belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1235</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>15</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1236</x:NAME>
<x:HELP>Insert 02-1236 (16 to 35 teeth) for L belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1236</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>16</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>35</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1237</x:NAME>
<x:HELP>Insert 02-1237 (36 to 72 teeth) for L belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1237</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>36</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1238</x:NAME>
<x:HELP>Insert 02-1238 (14 to 19 teeth) for H belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1238</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>19</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1239</x:NAME>
<x:HELP>Insert 02-1239 (20 to 29 teeth) for H belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1239</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>20</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>29</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>02-1240</x:NAME>
<x:HELP>Insert 02-1240 (30 to 60 teeth) for H belts or similar</x:HELP>
<x:DISPLAY_ONLY>true</x:DISPLAY_ONLY>
<x:VARIABLE>
<x:NAME>02-1240</x:NAME>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>30</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/11. insert.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_2MM_PG</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_2MM_PG</x:NAME>
<x:DEFAULT>0.76/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>0.63/::CF</x:MIN>
<x:MAX>0.887/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_3MM_PG</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_3MM_PG</x:NAME>
<x:DEFAULT>1.143/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.016/::CF</x:MIN>
<x:MAX>1.27/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_3MM_HTD</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_3MM_HTD</x:NAME>
<x:DEFAULT>1.22/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.093/::CF</x:MIN>
<x:MAX>1.347/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_5MM_PG</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_5MM_PG</x:NAME>
<x:DEFAULT>1.93/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.676/::CF::</x:MIN>
<x:MAX>2.184/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_5MM_PC</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_5MM_PC</x:NAME>
<x:DEFAULT>1.9/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.646/::CF::</x:MIN>
<x:MAX>2.154/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_5MM_HTD</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_5MM_HTD</x:NAME>
<x:DEFAULT>2.08/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.826/::CF::</x:MIN>
<x:MAX>2.334/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_8MM_PG</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_8MM_PG</x:NAME>
<x:DEFAULT>3.276/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>3.022/::CF::</x:MIN>
<x:MAX>3.530/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_8MM_PC</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_8MM_PC</x:NAME>
<x:DEFAULT>3.4/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>3.146/::CF::</x:MIN>
<x:MAX>3.654/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_14MM_PC</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_14MM_PC</x:NAME>
<x:DEFAULT>6.0/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>5.746/::CF::</x:MIN>
<x:MAX>6.254/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_14MM_HTD</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_14MM_HTD</x:NAME>
<x:DEFAULT>6.0/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>5.746/::CF::</x:MIN>
<x:MAX>6.254/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_MXL</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_MXL</x:NAME>
<x:DEFAULT>0.457/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>0.33/::CF::</x:MIN>
<x:MAX>0.584/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_XL</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_XL</x:NAME>
<x:DEFAULT>1.27/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.143/::CF::</x:MIN>
<x:MAX>1.397/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_L</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_L</x:NAME>
<x:DEFAULT>1.91/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>1.656/::CF::</x:MIN>
<x:MAX>2.164/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE_DEPTH_H</x:NAME>
<x:HELP>Enter tooth whole depth. Default value is recommended</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE_DEPTH_H</x:NAME>
<x:DEFAULT>2.29/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>2.036/::CF::</x:MIN>
<x:MAX>2.544/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/12. whole depth.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE2PG_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE2PG_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_2MM_PG::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3PG_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3PG_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_PG::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE3HTD_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE3HTD_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_3MM_HTD::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PG_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PG_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PG::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5PC_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5PC_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_PC::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE5HTD_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE5HTD_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_5MM_HTD::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PG_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PG_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PG::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE8PC_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE8PC_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_8MM_PC::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14PC_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14PC_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_PC::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLE14HTD_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLE14HTD_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_14MM_HTD::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEMXL_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEMXL_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_MXL::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEXL_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEXL_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_XL::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEL_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEL_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_L::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_0</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_0</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_0::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_1</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_1</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_1::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_2</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_2</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_2::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_3</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_3</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_3::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_4</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_4</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_4::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_5</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_5</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_5::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_6</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_6</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_6::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_7</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_7</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_7::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>WHOLEH_DEPTH_8</x:NAME>
<x:HELP>Calc number of cuts +1</x:HELP>
<x:VARIABLE>
<x:NAME>WHOLEH_DEPTH_8</x:NAME>
<x:DEFAULT>(::WHOLE_DEPTH_H::/::DEPTH_OF_CUT_8::)+1</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_2MM_PG</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_2MM_PG</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_2MM_PG::)-(::WHOLE_DEPTH_2MM_PG::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_3MM_PG</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_3MM_PG</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_3MM_PG::)-(::WHOLE_DEPTH_3MM_PG::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_3MM_HTD</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_3MM_HTD</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_3MM_HTD::)-(::WHOLE_DEPTH_3MM_HTD::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_5MM_PG</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_5MM_PG</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_5MM_PG::)-(::WHOLE_DEPTH_5MM_PG::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_5MM_PC</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_5MM_PC</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_5MM_PC::)-(::WHOLE_DEPTH_5MM_PC::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_5MM_HTD</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_5MM_HTD</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_5MM_HTD::)-(::WHOLE_DEPTH_5MM_HTD::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_8MM_PG</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_8MM_PG</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_8MM_PG::)-(::WHOLE_DEPTH_8MM_PG::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_8MM_PC</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_8MM_PC</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_8MM_PC::)-(::WHOLE_DEPTH_8MM_PC::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_14MM_PC</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_14MM_PC</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_14MM_PC::)-(::WHOLE_DEPTH_14MM_PC::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_14MM_HTD</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_14MM_HTD</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_14MM_HTD::)-(::WHOLE_DEPTH_14MM_HTD::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_MXL</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_MXL</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_MXL::)-(::WHOLE_DEPTH_MXL::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_XL</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_XL</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_XL::)-(::WHOLE_DEPTH_XL::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_L</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_L</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_L::)-(::WHOLE_DEPTH_L::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_FINISH_DIA_H</x:NAME>
<x:HELP>Finish dia calculation</x:HELP>
<x:VARIABLE>
<x:NAME>X_FINISH_DIA_H</x:NAME>
<x:DEFAULT>(::PART_DIAMETER_H::)-(::WHOLE_DEPTH_H::*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOTH_START_ANGLE</x:NAME>
<x:HELP>Enter the ANGLE position of the 1st tooth</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>TOOTH_START_ANGLE</x:NAME>
<x:DEFAULT>0</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>0</x:MIN>
<x:MAX>360</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/13. tooth start angle.jpg</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_2PG</x:NAME>
<x:HELP>Degree calculation for multiple holes</x:HELP>
<x:VARIABLE>
<x:NAME>DEG_CALC_2PG</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_2MM_PG::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_3PG</x:NAME>
<x:HELP>Degree calculation for multiple holes</x:HELP>
<x:VARIABLE>
<x:NAME>DEG_CALC_3PG</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_3MM_PG::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_3HTD</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_3HTD</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_3MM_HTD::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_5PG</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_5PG</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_5MM_PG::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_5PC</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_5PC</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_5MM_PC::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_5HTD</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_5HTD</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_5MM_HTD::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_8PG</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_8PG</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_8MM_PG::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_8PC</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_8PC</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_8MM_PC::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_14PC</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_14PC</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_14MM_PC::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_14HTD</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_14HTD</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_14MM_HTD::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_MXL</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_MXL</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_MXL::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_XL</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_XL</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_XL::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_L</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_L</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_L::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>DEG_CALC_H</x:NAME>
<x:VARIABLE>
<x:NAME>DEG_CALC_H</x:NAME>
<x:DEFAULT>360.0/::NUMBER_OF_TEETH_H::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START2PG_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START2PG_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_2MM_PG::)+((::WHOLE2PG_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3PG_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3PG_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_PG::)+((::WHOLE3PG_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START3HTD_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START3HTD_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_3MM_HTD::)+((::WHOLE3HTD_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PG_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PG_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PG::)+((::WHOLE5PG_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5PC_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5PC_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_PC::)+((::WHOLE5PC_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START5HTD_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START5HTD_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_5MM_HTD::)+((::WHOLE5HTD_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PG_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PG_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PG::)+((::WHOLE8PG_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START8PC_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START8PC_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_8MM_PC::)+((::WHOLE8PC_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14PC_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14PC_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_PC::)+((::WHOLE14PC_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>START14HTD_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>START14HTD_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_14MM_HTD::)+((::WHOLE14HTD_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTMXL_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTMXL_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_MXL::)+((::WHOLEMXL_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTXL_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTXL_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_XL::)+((::WHOLEXL_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTL_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTL_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_L::)+((::WHOLEL_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA0</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA0</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_0::*::DEPTH_OF_CUT_0::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA1</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA1</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_1::*::DEPTH_OF_CUT_1::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA2</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA2</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_2::*::DEPTH_OF_CUT_2::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA3</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA3</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_3::*::DEPTH_OF_CUT_3::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA4</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA4</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_4::*::DEPTH_OF_CUT_4::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA5</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA5</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_5::*::DEPTH_OF_CUT_5::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA6</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA6</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_6::*::DEPTH_OF_CUT_6::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA7</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA7</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_7::*::DEPTH_OF_CUT_7::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>STARTH_DIA8</x:NAME>
<x:HELP>Calc start dia with final cut being full depth</x:HELP>
<x:VARIABLE>
<x:NAME>STARTH_DIA8</x:NAME>
<x:DEFAULT>(::X_FINISH_DIA_H::)+((::WHOLEH_DEPTH_8::*::DEPTH_OF_CUT_8::)*2)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>4</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APPROACH</x:NAME>
<x:HELP>Enter the X-AXIS RAPID DISTANCE from diameter of part</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>X_RAPID_APPROACH</x:NAME>
<x:DEFAULT>12.7/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.254/::CF::</x:MIN>
<x:MAX>50.8/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/14. X rapid approach.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP</x:NAME>
<x:DEFAULT>::X_RAPID_APPROACH::*2</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_2MM_PG</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_2MM_PG</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_2MM_PG:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_3MM_PG</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_3MM_PG</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_3MM_PG:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_3MM_HTD</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_3MM_HTD</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_3MM_HTD:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_5MM_PG</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_5MM_PG</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_5MM_PG:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_5MM_PC</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_5MM_PC</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_5MM_PC:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_5MM_HTD</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_5MM_HTD</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_5MM_HTD:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_8MM_PG</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_8MM_PG</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_8MM_PG:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_8MM_PC</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_8MM_PC</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_8MM_PC:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_14MM_PC</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_14MM_PC</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_14MM_PC:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_14MM_HTD</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_14MM_HTD</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_14MM_HTD:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_MXL</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_MXL</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_MXL:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_XL</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_XL</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_XL:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_L</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_L</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_L:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_RAPID_APP_H</x:NAME>
<x:HELP>calculate x rapid diameter </x:HELP>
<x:VARIABLE>
<x:NAME>X_RAPID_APP_H</x:NAME>
<x:DEFAULT>::X_RAPID_APP::+::PART_DIAMETER_H:: </x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>3</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>APPROACH_FEEDRATE</x:NAME>
<x:HELP>Feed rate fixed for all variables to approch start diameter</x:HELP>
<x:VARIABLE>
<x:NAME>APPROACH_FEEDRATE</x:NAME>
<x:DEFAULT>1270/::CF::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>Z_RAPID_APPROACH</x:NAME>
<x:HELP>Enter the Z-AXIS RAPID DISTANCE from face of material</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>Z_RAPID_APPROACH</x:NAME>
<x:DEFAULT>12.7/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>.254/::CF::</x:MIN>
<x:MAX>50.8/::CF::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/15. Z rapid approach.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>X_MAX_TOOL_TRAVEL</x:NAME>
<x:HELP>Max travel of tool based on X offset</x:HELP>
<x:VARIABLE>
<x:NAME>X_MAX_TOOL_TRAVEL</x:NAME>
<x:DEFAULT>##53800+(::TOOL_OFFSET_NUMBER::)##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>X_MAX_TOOL_TRAVEL_USE</x:NAME>
<x:HELP>Max travel of tool based on X offset. This line make it positive.</x:HELP>
<x:VARIABLE>
<x:NAME>X_MAX_TOOL_TRAVEL_USE</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL::*(-1.)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>Z_MAX_TOOL_TRAVEL</x:NAME>
<x:HELP>Max travel of tool based on Z offset</x:HELP>
<x:VARIABLE>
<x:NAME>Z_MAX_TOOL_TRAVEL</x:NAME>
<x:DEFAULT>##54200+(::TOOL_OFFSET_NUMBER::)##</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>Z_MAX_TOOL_TRAVEL_USE</x:NAME>
<x:HELP>Max travel of tool based on Z offset. This line make it positive.</x:HELP>
<x:VARIABLE>
<x:NAME>Z_MAX_TOOL_TRAVEL_USE</x:NAME>
<x:DEFAULT>::Z_MAX_TOOL_TRAVEL::*(-1.)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>ZTOOL</x:NAME>
<x:HELP>Max travel of tool based on Z offset minus the Z rapid approach.</x:HELP>
<x:VARIABLE>
<x:NAME>ZTOOL</x:NAME>
<x:DEFAULT>::Z_MAX_TOOL_TRAVEL_USE::-::Z_RAPID_APPROACH::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>ZT</x:NAME>
<x:HELP>This variable reads max travel for Z-axis (minus 1 inch)</x:HELP>
<x:VARIABLE>
<x:NAME>ZT</x:NAME>
<x:DEFAULT>(##30003.036##/::CF::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>ZTRAVEL</x:NAME>
<x:HELP>This variable cleans up the decimals</x:HELP>
<x:VARIABLE>
<x:NAME>ZTRAVEL</x:NAME>
<x:DEFAULT>::ZT::*1.</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>ZPL</x:NAME>
<x:HELP>(ZPL) Z-axis Part Length maximum. Machine travel minus tool offset.</x:HELP>
<x:VARIABLE>
<x:NAME>ZPL</x:NAME>
<x:DEFAULT>(::ZTRAVEL::)-(::ZTOOL::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>TNO</x:NAME>
<x:HELP>This variable writes the T-code in the proper format</x:HELP>
<x:VARIABLE>
<x:NAME>TNO</x:NAME>
<x:DEFAULT>(::TOOL_NUMBER::*100.)+(::TOOL_OFFSET_NUMBER::)</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>XFIX1</x:NAME>
<x:HELP>This variable reads max travel for X-axis (minus 1 inch)</x:HELP>
<x:VARIABLE>
<x:NAME>XFIX1</x:NAME>
<x:DEFAULT>##30001.036##/::CF::</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>XFIX</x:NAME>
<x:HELP>This variable cleans up the decimals and multiplies by 2 for diameter value</x:HELP>
<x:VARIABLE>
<x:NAME>XFIX</x:NAME>
<x:DEFAULT>::XFIX1::*2.</x:DEFAULT>
<x:RANGES>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##10000##</x:LVALUE>
<x:RVALUE>##10000##</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:INPUT>
<x:INPUT>
<x:NAME>Z_CUT_LENGTH</x:NAME>
<x:HELP>Enter the Z-AXIS CUT LENGTH</x:HELP>
<x:VARIABLE>
<x:NAME>Z_CUT_LENGTH</x:NAME>
<x:DEFAULT>0.00/::CF::</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>0.00/::CF::</x:MIN>
<x:MAX>::ZPL::</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/17. Z CUT LEGTH.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>FLOOD_COOLANT</x:NAME>
<x:HELP>Enter the value for FLOOD COOLANT On (8) or Off (9)?</x:HELP>
<x:VARIABLE>
<x:NAME>FLOOD_COOLANT</x:NAME>
<x:DEFAULT>8</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>8</x:ENUM>
<x:ENUM>9</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/16. coolant.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>HPC_COOLANT</x:NAME>
<x:HELP>High pressure coolant? (88) = On / (89) = Off</x:HELP>
<x:VARIABLE>
<x:NAME>HPC_COOLANT</x:NAME>
<x:DEFAULT>89</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>88</x:ENUM>
<x:ENUM>89</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>##40030##</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/16. coolant.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>RETRACT_X_HOME</x:NAME>
<x:HELP>Enter (Y) to send turret home in X axis or (N) to enter a value on next line</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>RETRACT_X_HOME</x:NAME>
<x:DEFAULT>Y</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>Y</x:ENUM>
<x:ENUM>N</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-2</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_2PG</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_2PG</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_2MM_PG::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_3PG</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_3PG</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_3MM_PG::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_3HTD</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_3HTD</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_3MM_HTD::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_5PG</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_5PG</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_5MM_PG::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_5PC</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_5PC</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_5MM_PC::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_5HTD</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_5HTD</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_5MM_HTD::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_8PG</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_8PG</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_8MM_PG::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_8PC</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_8PC</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_8MM_PC::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_14PC</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_14PC</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_14MM_PC::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X14HTD</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X14HTD</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_14MM_HTD::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_MXL</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_MXL</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_MXL::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_XL</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_XL</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_XL::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_L</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_L</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_L::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_X_H</x:NAME>
<x:HELP>Enter the X TOOL CHANGE position in DIAMETER from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_X_H</x:NAME>
<x:DEFAULT>::X_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::PART_DIAMETER_H::</x:MIN>
<x:MAX>::X_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/18. X HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>RETRACT_Z_HOME</x:NAME>
<x:HELP>Enter (Y) to send turret home Z axis or (N) to enter a value on next line</x:HELP>
<x:SAVE>true</x:SAVE>
<x:VARIABLE>
<x:NAME>RETRACT_Z_HOME</x:NAME>
<x:DEFAULT>Y</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>Y</x:ENUM>
<x:ENUM>N</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-2</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/19. Z HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>TOOL_CHANGE_POSITION_Z</x:NAME>
<x:HELP>Enter the Z TOOL CHANGE position from DATUM point</x:HELP>
<x:VARIABLE>
<x:NAME>TOOL_CHANGE_POSITION_Z</x:NAME>
<x:DEFAULT>::Z_MAX_TOOL_TRAVEL_USE::*.99</x:DEFAULT>
<x:RANGES>
<x:RANGE>
<x:INCLUSIVE>YES</x:INCLUSIVE>
<x:MIN>::Z_RAPID_APPROACH::</x:MIN>
<x:MAX>::Z_MAX_TOOL_TRAVEL_USE::*.99</x:MAX>
</x:RANGE>
</x:RANGES>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>0</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_Z_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/19. Z HOME.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:INPUT>
<x:NAME>END_M_CODE</x:NAME>
<x:HELP>Enter value: Stop (0), Optional Stop (1), End Program (30)</x:HELP>
<x:VARIABLE>
<x:NAME>END_M_CODE</x:NAME>
<x:DEFAULT>30</x:DEFAULT>
<x:RANGES>
</x:RANGES>
<x:ENUMS>
<x:ENUM>0</x:ENUM>
<x:ENUM>1</x:ENUM>
<x:ENUM>30</x:ENUM>
</x:ENUMS>
</x:VARIABLE>
<x:CONTROL>
<x:DPOINT>-1</x:DPOINT>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::TOOLXZ::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
<x:PICTURE>
<x:NAME>.ODSprocketPics/20. END.png</x:NAME>
<x:LABELS>
</x:LABELS>
</x:PICTURE>
</x:INPUT>
<x:PROGRAM>
<x:LINES>
<x:LINE>
<x:GCODE>(SAFETY LINE BELOW)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 G54 G18 G40 G80  G97 G99</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(WORK OFFSET = ::WORK_OFFSETS::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(TOOL = ::TOOL_NUMBER:: / OFFSET = ::TOOL_OFFSET_NUMBER::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE></x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1211)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>25</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1212)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>26</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>56</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1213)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>57</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0795)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>27</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0799)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>28</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_2MM_PG::</x:LVALUE>
<x:RVALUE>56</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0803)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_PG::</x:LVALUE>
<x:RVALUE>57</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1214)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>24</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1215)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>25</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>50</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1216)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_3MM_HTD::</x:LVALUE>
<x:RVALUE>51</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0807)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>15</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0811)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>16</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>32</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0815)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PG::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0807)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>15</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0811)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>16</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>32</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0815)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_PC::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1217)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>20</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1218)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>21</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>46</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1219)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_5MM_HTD::</x:LVALUE>
<x:RVALUE>47</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0819)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>29</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0823)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>30</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>50</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-0827)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PG::</x:LVALUE>
<x:RVALUE>51</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1220)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>27</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1221)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>28</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>37</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1222)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_8MM_PC::</x:LVALUE>
<x:RVALUE>38</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1223)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1224)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>34</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>42</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1225)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_PC::</x:LVALUE>
<x:RVALUE>43</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1226)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>33</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1227)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>34</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>42</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1228)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_14MM_HTD::</x:LVALUE>
<x:RVALUE>43</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1232)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>24</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1229)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>25</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>50</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1230)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_MXL::</x:LVALUE>
<x:RVALUE>51</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1231)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>21</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1233)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>22</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>40</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1234)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_XL::</x:LVALUE>
<x:RVALUE>41</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1235)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>15</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1236)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>16</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>35</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1237)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_L::</x:LVALUE>
<x:RVALUE>36</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1238)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>19</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1239)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>20</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>4</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>29</x:RVALUE>
<x:OPERATOR>GT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>5</x:ID>
<x:LVALUE>^^3^^</x:LVALUE>
<x:RVALUE>^^4^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(HAAS INSERT = 02-1240)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::NUMBER_OF_TEETH_H::</x:LVALUE>
<x:RVALUE>30</x:RVALUE>
<x:OPERATOR>LT</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = NON ALLOY STEEL)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = LOW ALLOY STEEL)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = STAINLESS STEEL)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = GRAY CAST IRON )</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = ALUMINUM)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = COPPER / BRASS TYPE)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL =PLASTIC )</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = SUPER ALLOY )</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MATERIAL = HARDENED)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_2MM_PG:: FOR 2MM PITCH AT ::NUMBER_OF_TEETH_2MM_PG:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_3MM_PG:: FOR 3MM PITCH AT ::NUMBER_OF_TEETH_3MM_PG:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_3MM_HTD:: FOR 3MM PITCH AT ::NUMBER_OF_TEETH_3MM_HTD:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_5MM_PG:: FOR 5MM PITCH AT ::NUMBER_OF_TEETH_5MM_PG:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_5MM_PC:: FOR 5MM PITCH AT ::NUMBER_OF_TEETH_5MM_PC:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_5MM_HTD:: FOR 5MM PITCH AT ::NUMBER_OF_TEETH_5MM_HTD:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_8MM_PG:: FOR 8MM PITCH AT ::NUMBER_OF_TEETH_8MM_PG:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_8MM_PC:: FOR 8MM PITCH AT ::NUMBER_OF_TEETH_8MM_PC:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_14MM_PC:: FOR 14MM PITCH AT ::NUMBER_OF_TEETH_14MM_PC:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_14MM_HTD:: FOR 14MM PITCH AT ::NUMBER_OF_TEETH_14MM_HTD:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_MXL:: FOR 0.08" PITCH AT ::NUMBER_OF_TEETH_MXL:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_XL:: FOR 0.2" PITCH AT ::NUMBER_OF_TEETH_XL:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_L:: FOR 0.375" PITCH AT ::NUMBER_OF_TEETH_L:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(MACHINE DIAMETER TO ::PART_DIAMETER_H:: FOR 0.5" PITCH AT ::NUMBER_OF_TEETH_H:: TEETH)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 2MM POWER GRIP GT= ::PITCH_DIAMETER_2MM_PG::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 3MM POWER GRIP GT= ::PITCH_DIAMETER_3MM_PG::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 3MM HTD= ::PITCH_DIAMETER_3MM_HTD::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 5MM POWER GRIP GT= ::PITCH_DIAMETER_5MM_PG::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 5MM POLY CHAIN GT= ::PITCH_DIAMETER_5MM_PC::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 5MM HTD= ::PITCH_DIAMETER_5MM_HTD::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 8MM POWER GRIP GT= ::PITCH_DIAMETER_8MM_PG::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 8MM POLY CHAIN GT= ::PITCH_DIAMETER_8MM_PC::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 14MM POLY CHAIN GT= ::PITCH_DIAMETER_14MM_PC::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR 14MM HTD= ::PITCH_DIAMETER_14MM_HTD::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR MXL TYPE SPROCKET= ::PITCH_DIAMETER_MXL::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR XL TYPE SPROCKET= ::PITCH_DIAMETER_XL::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR L TYPE SPROCKET= ::PITCH_DIAMETER_L::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(PITCH DIA FOR H TYPE SPROCKET = ::PITCH_DIAMETER_H::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_0::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_1::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_2::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_3::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_4::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_5::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_6::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_7::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(DEPTH OF CUT = ::DEPTH_OF_CUT_8::)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>(G156 CANNED CYCLE I CODE IS RADIAL DEPTH OF CUT AND D CODE IS THE RADIAL RETRACTION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=0 (ZERO OUT THE C AXIS BEFORE STARTING)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>T::TNO::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>$$WORK_OFFSETS$$</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G98 M05</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 Y0.0</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::Y_AXIS::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G4 P1.0</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 Z::Z_RAPID_APPROACH::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_2MM_PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_3MM_PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_3MM_HTD::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_5MM_PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_5MM_PC::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_5MM_HTD::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_8MM_PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_8MM_PC::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_14MM_PC::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_14MM_HTD::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_MXL::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_XL::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_L::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::X_RAPID_APP_H::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M::FLOOD_COOLANT::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::HPC_COOLANT::</x:LVALUE>
<x:RVALUE>88</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M::HPC_COOLANT::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::HPC_COOLANT::</x:LVALUE>
<x:RVALUE>89</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START2PG_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3PG_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START3HTD_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PG_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5PC_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START5HTD_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PG_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START8PC_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14PC_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::START14HTD_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTMXL_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTXL_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTL_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA0:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA1:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA2:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA3:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA4:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA5:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA6:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA7:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G01 X::STARTH_DIA8:: F::APPROACH_FEEDRATE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G103 P1</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=::TOOTH_START_ANGLE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>N201</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_2MM_PG:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_3MM_PG:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_3MM_HTD:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_5MM_PG:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_5MM_PC:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_5MM_HTD:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_8MM_PG:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_8MM_PC:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_14MM_PC:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_14MM_HTD:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_MXL:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_XL:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_L:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M97 P101 L::NUMBER_OF_TEETH_H:: (CALL LOCAL SUB NUMBER OF LOOPS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>GOTO301</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>N101 (BEGIN LOCAL SUB)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 C#30</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::C_AXIS::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 M19 R#30</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::C_AXIS::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M14 (LOCK SPINDLE)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_2MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_3MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_5MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PG:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_8MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_PC:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_14MM_HTD:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_MXL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_XL:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_L:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_0::*2] D[::DEPTH_OF_CUT_0::*4] F::FEEDRATE_0::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>0</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_1::*2] D[::DEPTH_OF_CUT_1::*4] F::FEEDRATE_1::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_2::*2] D[::DEPTH_OF_CUT_2::*4] F::FEEDRATE_2::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>2</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_3::*2] D[::DEPTH_OF_CUT_3::*4] F::FEEDRATE_3::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>3</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_4::*2] D[::DEPTH_OF_CUT_4::*4] F::FEEDRATE_4::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>4</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_5::*2] D[::DEPTH_OF_CUT_5::*4] F::FEEDRATE_5::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>5</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_6::*2] D[::DEPTH_OF_CUT_6::*4] F::FEEDRATE_6::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>6</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_7::*2] D[::DEPTH_OF_CUT_7::*4] F::FEEDRATE_7::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>7</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G156 X::X_FINISH_DIA_H:: Z-::Z_CUT_LENGTH:: I[::DEPTH_OF_CUT_8::*2] D[::DEPTH_OF_CUT_8::*4] F::FEEDRATE_8::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::PART_MATERIAL_TYPE::</x:LVALUE>
<x:RVALUE>8</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_2PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_3PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_3HTD::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_5PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_5PC::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_5HTD::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_8PG::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_8PC::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_14PC::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_14HTD::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_MXL::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_XL::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_L::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>#30=#30+::DEG_CALC_H::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M15 (UNLOCK C AXIS)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M99</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>N301</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M9</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::HPC_COOLANT::</x:LVALUE>
<x:RVALUE>88</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M89</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::HPC_COOLANT::</x:LVALUE>
<x:RVALUE>89</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M15</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 Z::Z_RAPID_APPROACH::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 G53 X0.</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_2PG:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>A</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_3PG:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>B</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_3HTD:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>H</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_5PG:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>C</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_5PC:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>E</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_5HTD:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>I</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_8PG:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>D</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_8PC:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>F</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_14PC:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>G</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X14HTD:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>J</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_MXL:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>K</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_XL:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>L</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_L:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>M</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 X::TOOL_CHANGE_POSITION_X_H:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_X_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>2</x:ID>
<x:LVALUE>::BELT_PITCH::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>NE</x:OPERATOR>
</x:RULE>
<x:RULE>
<x:ID>3</x:ID>
<x:LVALUE>^^1^^</x:LVALUE>
<x:RVALUE>^^2^^</x:RVALUE>
<x:OPERATOR>OR</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 G53 Z0.</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_Z_HOME::</x:LVALUE>
<x:RVALUE>N</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 Z::TOOL_CHANGE_POSITION_Z:: (SAFE TC POSITION)</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::RETRACT_Z_HOME::</x:LVALUE>
<x:RVALUE>Y</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>G00 Y0.0</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:RULE>
<x:ID>1</x:ID>
<x:LVALUE>::Y_AXIS::</x:LVALUE>
<x:RVALUE>1</x:RVALUE>
<x:OPERATOR>EQ</x:OPERATOR>
</x:RULE>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>( END OD BROACH  CYCLE )</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
<x:LINE>
<x:GCODE>M::END_M_CODE::</x:GCODE>
<x:CONTROL>
<x:RULES>
<x:ACTION>HIDE</x:ACTION>
</x:RULES>
</x:CONTROL>
</x:LINE>
</x:LINES>
</x:PROGRAM>
<x:SETUP>
</x:SETUP>
</x:TEMPLATE>
