10" (254mm) Through-Hole 3-Jaw Hydraulic Power Chuck, A2-6 Spindle Nose, M75x2 Drawbar Nut
Artikelnummer 05-0932HPC10-A6, M75x2
Beschrijving
This 10" (254mm) 3-jaw hydraulic power chuck with a A2-6 mount accommodates both OD and ID clamping, and has a maximum speed rating of 4500 rpm. The chuck is self-centering with through-hole capabilities. The spindle adapter, hardware, and soft steel machinable lathes jaws are included.Technische specificaties
Aantal klauwen | 3 |
Besturingssysteem | Draw Tube |
Spilneus | A2-6 |
Afmeting van de klauwplaat | 10.0 in \ 254.0 mm |
Schroefdraadafmeting trekmoer | M75x2.0 |
Machinemodellen | ST-15, ST-15Y, ST-15LY, ST-20, ST-20L, ST-20Y, ST-20LY, ST-15L, DS-20Y |
[ØD] Boordiameter | 2.677 in \ 67.99 mm |
[ØA] Diameter van de flens | 4.179 in \ 106.15 mm |
[ØBD] Schachtdiameter | 10.236 in \ 259.99 mm |
[OAL] Totale lengte | 4.803 in \ 121.99 mm |
[DS] Drawnut Stroke | 0.847 in \21.51 mm |
[JS] klauwslag | 0.35 in \ 8.9 mm |
Vertandingsmaat | 1.5 mm x 60˚ |
Maximale omw/min | 4500 |
[NE]Draw Tube Extended | 1.417 in \ 35.99 mm |
[NR] Draw Tube Retracted | 0.570 in \ 14.48 mm |
Schroefdraad [TP1] | 1/2-13 UNC |
Gewicht | 86.4 lbs \ 39.2 kg |
Land van herkomst | Taiwan |
Technische afbeeldingen
Lijntekening & specificaties vergroten