HQCBD-65, Dead Length Collet Chuck for A2-8 Spindle Nose, M115x2 Drawbar Nut
Part # 05-0336CBD-H65A8, M115x2 AG
Description
Reduce your lathe set-up times with this Haas quick-change collet chuck. Collets are changed in seconds, using a handheld collet changing tool (not included), making the changeover from one size material to another fast and easy. This dead-length style A2-8 collet chuck is compatible with Haas ST-28, ST-35, and ST-40 lathes. Accepts a wide range of quick-change collets, in smooth and serrated styles (not included).Download documents
Technical specifications
Type | Collet Chuck |
Collet Type | Dead Length Collet Chuck |
Machine Models | ST-28, ST-28L, ST-28Y, ST-28LY, ST-35, ST-35L, ST-35Y, ST-35LY, ST-40, ST-40L, ST-40Y, ST-40LY, ST-40S, ST-40SY |
Collet Series | HRG-65 |
Spindle Nose | A2-8 |
[ØD] Bore Diameter | 2.68 in \ 68.0 mm |
[ØBD] Body Diameter | 7.95 in \ 202.0 mm |
[ØA] Flange Diameter | 7.953 in \ 202.0 mm |
[ØB] Nose Diameter | 6.77 in \ 172.0 mm |
[ØF] Spindle Nose Diameter | 5.5 in \ 139.72 mm |
[C] Flange Length | 2.72 in \ 69.0 mm |
[E] Nose Length | 1.67 in \ 42.5 mm |
[OAL] Overall Length | 4.488 in \ 114.0 mm |
[G] Throat Depth | 2.13 in \ 54.0 mm |
Draw Nut Thread Size | M115x2.0 |
Concentricity | 0.0004 in \ 0.01 mm |
Maximum Collet Capacity | 3.15 in \ 80.0 mm |
Minimum Collet Capacity | 0.157 in \ 4.0 mm |
Maximum RPM | 6000 |
Maximum Clamping Force | 23155.3 lbs \ 103.0 kN |
Weight | 46.3 lbs \ 21.0 kg |
Country of Origin | Taiwan |
Technical Images
Enlarge Line Drawing & Specs
Haas Collet Chuck 65
- Dead length collet chuck
- Compatible with Haas ST-28 and ST-35 with 4.0" (101.6mm) bar capacity, including long-bed versions and Y-axis
- Collet changes in seconds (requires handheld collet changing tool)
- High clamping accuracy and rigidity
- Sealed design for long life and minimal maintenance
- Uses rubber grip collets for better grip and larger gripping range
VERIFY YOUR DRAWTUBE THREAD SIZE
This collet chuck will only fit on Haas ST-28 and ST-35 Lathes that feature an M115 thread. Please refer to the layout drawing of your machine to verify the drawtube thread and ensure an accurate fit.
NOTE: Spindle reduction sleeve/liner length may need to be modified.
Part Transfer Minimum Distance
NOTE: Ensure that your part transfer distance is suitable for your application. The part transfer minimum distance will vary depending on your machine and collet chucks.
For dual-spindle applications, we recommend referring to your machine's dedicated machine layout drawing (MLD) to determine the face-to-face distance between spindles.
For legacy machines, this distance may be manually measured.
After subtracting the overall length of your chucks from the spindle face-to-face distance, determine if the resulting part transfer minimum distance is too large for your intended workpiece. Alternative solutions may be required for proper part transfers.
For dual-spindle applications, we recommend referring to your machine's dedicated machine layout drawing (MLD) to determine the face-to-face distance between spindles.
For legacy machines, this distance may be manually measured.
After subtracting the overall length of your chucks from the spindle face-to-face distance, determine if the resulting part transfer minimum distance is too large for your intended workpiece. Alternative solutions may be required for proper part transfers.