Hardened Steel V-Block & Clamp Set, 70x44x40mm, 90° V Angle, 6-32mm Ø Clamping Range,
Part # 09-0551V-BLOCKS & CLAMP SET, 70x44x40mm, 6-32mm
Description
This Haas hardened steel V-block and clamp set can hold workpiece diameters between 6-32mm for inspection purposes. This set is precision ground as a matched pair to within 0.003mm on each V face, and to within 0.01mm squareness & parallelism on the other contact surfaces. Each clamp can fit over either V groove and features a single retaining screw to hold the workpiece.Technical specifications
Type | Hardened Steel V-Block |
System of Measurement | Metric - ISO |
[L] Length | 70.0 mm |
[W] Width | 44.0 mm |
[H] Height | 40.0 mm |
V Groove Angle | 90 |
V Width | 32.0 mm |
Secondary V Width | 18.0 mm |
V Depth | 16.5 mm |
Secondary V Depth | 9.5 mm |
Maximum Workpiece Diameter | 32.0 mm |
Clamp Slot Width | 10.0 mm |
V Flatness | 0.003 mm |
Squareness | 0.006 mm |
Parallelism | 0.01 mm |
Rockwell Hardness | 52 - 58 HRC |
Material | 40Cr Steel |
Weight | 3.3 lb \ 1.5 kg |
Country of Origin | China |
Technical Images
Enlarge Line Drawing & Specs