HJB-08, 8" (210 mm) gleitbarer Bohrring für Futterbacken von Drehmaschinen
Teilenummer 05-0512HJB-08
Dokumente herunterladen
Technische Daten
Spannfuttergröße | 8.0 in \ 210.0 mm |
Typ | HJB |
[A] Abmessung | 0.47 in \ 12.0 mm |
[B] Abmessung | 8.58 in \ 218.0 mm |
[C] Abmessung | 4.53 in \ 115.0 mm |
[D] Abmessung | 0.59 in \ 15.0 mm |
[E] Abmessung | 1.42 in \ 36.0 mm |
[F] Abmessung | 0.35 in \ 9.0 mm |
[G] Abmessung | 0.73 in \ 18.5 mm |
Maximale U/min | 700 |
Maximaler Klemmdruck | 8.0 kgf/cm² |
Gewicht | 5.3 lbs \ 2.4 kg |
Ursprungsland | Taiwan |
Technische Bilder
Liniendarstellung & Spezifikationen vergrößern
*Haas Tooling boring rings are for hydraulic power chucks that come standard on Haas ST and DS models and not for manual scroll-type chucks.
*Verify dimension [G] in the tech specs suits your existing jaws. Pin diameter may need modifying to suit Haas 15-inch chuck jaws.
BUY A BORING RING & GET 50% OFF 2 SETS OF SOFT JAWS
*Limit to 2 soft jaw sets per boring ring. Pie jaws and 15" jaws are not included. The lowest-priced soft jaws will be discounted. Discount will be displayed in your cart.
START SAVING | LEARN MORE HAAS LATHE BORING RINGS OVERVIEW
HJB Boring Rings:
- Filter through the range of HJB rings by your chuck size
- A single ring can be used to bore a wide range of diameters for a specific lathe chuck size
- Easy fine jaw adjustment, to prevent too much material removal when re-cutting jaws