HJB-05, anillo de mandrinado de 5” (135 mm) de tipo deslizante para mordazas de plato de torno
Referencia 05-0510HJB-05
Descarga documentos
Especificaciones técnicas
Tamaño del plato de garras | 5.0 in \ 135.0 mm |
Tipo | HJB |
[A] Dimensión | 0.47 in \ 12.0 mm |
[B] Dimensión | 5.51 in \ 140.0 mm |
[C] Dimensión | 2.36 in \ 60.0 mm |
[D] Dimensión | 0.47 in \ 12.0 mm |
[E] Dimensión | 1.1 in \ 28.0 mm |
[F] Dimensión | 0.35 in \ 9.0 mm |
[G] Dimensión | 0.51 in \ 13.0 mm |
RPM máximas | 800 |
Presión de agarre máxima | 8.0 kgf/cm² |
Peso | 2.6 lbs \ 1.2 kg |
País de origen | Taiwán |
Imágenes técnicas
Ampliar dibujo lineal & especificaciones
*Haas Tooling boring rings are for hydraulic power chucks that come standard on Haas ST and DS models and not for manual scroll-type chucks.
*Verify dimension [G] in the tech specs suits your existing jaws. Pin diameter may need modifying to suit Haas 15-inch chuck jaws.
BUY A BORING RING & GET 50% OFF 2 SETS OF SOFT JAWS
*Limit to 2 soft jaw sets per boring ring. Pie jaws and 15" jaws are not included. The lowest-priced soft jaws will be discounted. Discount will be displayed in your cart.
START SAVING | LEARN MORE HAAS LATHE BORING RINGS OVERVIEW
HJB Boring Rings:
- Filter through the range of HJB rings by your chuck size
- A single ring can be used to bore a wide range of diameters for a specific lathe chuck size
- Easy fine jaw adjustment, to prevent too much material removal when re-cutting jaws