6" Single-Station Fixed-Jaw Vise, 9" Opening, Flange Style, Haas Workholding by Kurt

Name: 6" Single-Station Fixed-Jaw Vise, 9" Opening, Flange Style, Haas Workholding by Kurt
Brand: Haas Tooling
SKU: 05-0404
Price: 889.95 USD
Availability: InStock
Rating: 5 (4 reviews)

Part # 05-0404HKDX6

* All prices and specifications subject to change without notice. Actual product appearance & included accessories may differ.

Description

Our Haas Workholding by Kurt 6" single-station fixed-jaw vise is the same high-quality DX6 Kurt vise we all know and love – branded specifically for Haas. This flange-style vise has a 9" maximum opening, and features a cast-in stationary jaw for less deflection and more stability during clamping. Proprietary AngLock® design ensures alignment of the moving jaw, and reduces jaw lift for superior performance. The bolt-on jaws are easily changed or reversed, and machinable steel and aluminum soft jaws are available.

Download documents

Clamp Force Graph KURT Lifetime Warranty

Technical specifications

System of Measurement	Inch - ANSI
Vise Type	Manual
Vise Holding Type	Fixed Jaw
Number of Stations	1
[BL] Body Length	16.81 in \ 426.97 mm
[BH] Body Height	2.875 in \ 73.03 mm
[H] Height of Screw Hole	0.94 in \ 23.88 mm
[JH] Jaw Height	1.735 in \ 44.07 mm
[JW] Jaw Width	6.0 in \ 150.0 mm
[a] Dimension	0.656 in \ 16.66 mm
[b] Dimension	5.972 in \ 151.69 mm
[OAL] Overall Length	18.258 in \ 463.75 mm
[OAH] Overall Height	4.36 in \ 110.74 mm
[OAW] Overall Width	7.391 in \ 187.73 mm
[J1] Inner Jaw Range	0.0-9.08 in \ 0.0-230.6 mm
[J3] Outer Jaw Range	7.76-16.84 in \ 197.1-427.7 mm
[VO] Vise Opening	9.0 in \ 225.0 mm
[BT] Base Thickness	0.82 in \ 20.83 mm
[S] Screw Spacing	3.875 in \ 98.43 mm
[ZPC] Zero Point Connections	0
[TP] Thread Pitch	1/2"-13
[W] Wrench Size	0.75 in \ 3/4"
Weight	78.0 lbs \ 35.0 kg
Country of Origin	USA

Technical Images

Enlarge Line Drawing & Specs

Mill Workholding Fixed-Jaw Vise Overview

Which fixed-jaw vise is right for you? Watch this overview as we walk you through all there is to know about the Haas fixed-jaw vise lineup so that you can choose the right vise for the job.

Haas Workholding By Kurt

This is the same high-quality DX6 Kurt vise that we’ve all come to know and love – designed and branded specifically for Haas. Pair your machine with proven, great-quality tools and workholding.

HAVE YOU CLEANED YOUR VISE RECENTLY?

Vise Cleaning and Maintenance

Keep your vise operating smoothly! See how to clean and maintain your vise.

1. Loosen the front screw and remove the floating jaw.

2. Clean out any chips from the nut block inside threads with compressed air. Then blow off the base of the vise.

3. Wipe off the rails and the bottom of the floating jaw. Don’t forget to take out and clean the half-moon spacer in the floating jaw.

4. Grease the half-moon spacer and place it back in the floating jaw. Apply a light coat of machine oil to contact surfaces.

5. Re-seat the floating jaw (be sure to flush it with the rail).

6. Tighten the floating jaw, then back off slightly (as seen in the video).

Vise Maintenance = Good Parts

This TOD addresses a very straightforward topic. Cleaning and maintaining your vise is an important step that most of us, unfortunately, neglect more often than not. Mark shows us just how easy it is to get this done and have a little peace of mind about our vise longevity and proper part clamping.